Powermatic

table saws

PM2000 10" Left Tilt Cabinet Saw w/ Router Lift

The award winning PM2000 tablesaw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your tablesaw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated.

Standard Equipment:

• Stock# 1792001K 3HP, 230V, 1 Phase $2,999.99
• Stock# 1792011K 5HP, 230V, 1 Phase $3,599.99
• Stock# 1792006K 5HP,230V,  3 Phase $2,999.00
• 50" Accufence
• Standard Left and Right Cast Iron Wings, 10" Ea
• Motor Cover and Arbor Wrench
• Blade and Power Cord are not included

Tablesaws

PM2000 10" Left Tilt Tablesaw w/ Standard Extension Table

The award winning PM2000 tablesaw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your tablesaw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated

Standard Equipment:

• Stock# 1792000K 3HP, 230V 1 Phase $2,699.99
• Stock# 1792002K 3HP, 230V 1 Phase
  W/30" Accufence $2,599.99
• Stock# 1792010K 5HP, 230V 1 Phase $3,099.99
  Stock# 1792005K 5HP, 230/460V 3 Phase $2,699.99
• 50" Accufence
• Standard Left and Right Cast Iron Wings, 10" Ea
• Table Extension and Legs
• Built in Heavy Duty Caster Set
• Motor Cover and Arbor Wrench
  Accufence
• Blade and Power Cord are not included
  

Jointers

54HH 6" Helical Head Long Bed Jointer

This 6" Jointer features a helical cutterhead with 40 four-sided knife inserts – this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways and have a built-in rabbeting ledge. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.

Standard Equipment:

• 2 Push blocks
• 4" dust Collection Port
• Cutterhead Guard

Jointer

60HH 8"  Helical Head Jointer

This large 8" jointer features one of the longest beds on the market providing additional workpiece support. The unique infeed table adjustment lever can be used to quickly advance table height or rotated for fine adjustments. The center mounted heavy duty fence system allows you to bring it forward to complete smaller rabbets as well as tilt the fence a full 90° to accommodate either 45° bevel.

Standard Equipment:

• Set of 3 Heat Treated, High Speed Steel Knives
• Cutter Head guard
• Heavy Duty Industrial Push Button Switch
• Push Blocks

   
 
    1610086K 60HH Helical Head 2HP, 230V, 1 Phase   $1,999.00
   1610084K 60C 3 Knife cutter Head, 230V, 1 Phase    $1,599.00

Jointer

PJ-882 HH 8" Helical Head Parallelogram Jointer

The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP or 3HP motors are totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs.

Specifications:

• 1610082 Helical Head, 2HP, 230V 1 Phase$2,599.99
• 1610083 Helical Head, 3HP, 230V 3 Phase $2,599.99
• 1610079 3 Knife Cutter Head, 2HP, 230V 1 Phase $1,999.99
• 1610080 3 Knife Cutter Head, 2HP, 230V 3 Phase $1,999.99
• Rabbiting Capacity 1/2"
• Table Surface 83" X 8"
• Infeed Table 44"
• Outfeed Table 38"
• Dust Port 4"
• Shipping Weight 764/Lbs

Planers

15HH 15" Helical Head Planer

The helical cutterhead on this planer provides smoother cutting and a finer finish than conventional knives, and the 98 four-sided knife inserts do not require adjustment after installing. Three V-belts transfer maximum power from the 3HP motor to the cutterhead. Your workpiece will get substantial support from the precision ground cast iron table and two large extension wings. The 4" dust port angles the collection hose away from the work area. Stock return rollers atop the machine speed repetitive cuts. The serrated steel infeed and smooth steel outfeed roller allow for 1/8" maximum depth of cut and trouble-free operation. A 2-speed gearbox features an automatic chain tensioner. The one-piece welded steel stand has built-in lockable casters for easy movement around the shop.

Stock# 1791213 $2,599.99

Standard Equipment:

• 3HP , 230V TEFC motor with magnetic controls
• BYRD helical cutterhead
• 4" dust port
• Cast Iron infeed/outfeed extension tables
• Closed stand with built in casters

Planer

209HH 20" Helical Head Planer

This heavy duty planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20" planing capacity will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing than conventional systems, and the four-sided knife inserts seat themselves without requiring a set-up gauge. The 5" dust port connects easily to any dust collector. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut.

Standard Equipment:

• 5HP,1 phase, 230V TEFC motor with magnetic controls or 5HP, 3 Phase, 230V
• Byrd Helical Cutter Head
• 5" dust port
• Cast Iron infeed/outfeed extension tables
• Closed stand with built in casters

Stock# 1791315 5HP, 230V, 1 Phase $3,599.99

Stock# 1791316 5HP, 230V, 3 Phase $3,599.99

Shaper

PM2700 SHAPER

This new PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30" x 40" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.

Standard Equipment:

• 3/4" and 1-1/4" Spindles                                                               
• Spindle Height Digital Readout
• Feather Board Hold Downs
• Deluxe Miter Gauge
• Intergrated Caster System
• Predrilled on right and left sides for Power feeder

Bandsaws

PWBS-14CS 14" Deluxe Bandsaw

The PWBS-14CS Bandsaw has an extra large, two-piece cast iron table. It consists of a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area of 15" x 20". A balanced, nine-spoke cast iron wheel makes for smooth blade travel, and a Carter™ quick tension release lever makes blade changing easy. A micro-adjustable dual bearing blade guide system is featured above and below the table, as well as a work lamp and chip blower. A Poly-V belt maximizes power transmission while minimizing noise and vibration. It has full 6" under guide capacity with 13-1/2" frame to blade clearance. The aluminum rip fence comes with a resaw attachment.

Standard Equipment:

• Carter Quick Tension Release
• Adjustable moter gauge
• 1/4" Bandsaw Blade
• Gooseneck work light and Chip Blower

Drill Press

PM2800 18" Variable Speed Drill Press

This new drill press was designed with the woodworker in mind. Its design has many convenient features that other so-called woodworking drill presses do not offer. The twin LED lights are designed to eliminate cast shadows on the workpiece often produced by conventional lights. The twin lasers will pinpoint the bit entry on the workpiece. The expandable work table is the industry's largest in this class. The single handle speed changer allows you to run the full range of speeds without ever touching a belt, and the front mounted digital readout displays the exact speed the spindle is running. It also features a larger motor than any other drill press in its class to handle the heaviest jobs.
 
Specifactions:                                                                                                         

• Swing 18"                                                                                                             
• Chuck Size 5/8" (keyless)
• Spindle Travel 4-3/8"
• Table Size 16" x 14" (Fully Extended 16 x 26)
• Motor 1HP, 115/230V (wired 115v)
• Overall Size (H x W x D/in) 68 x 23.5 x 31.5
• Shipping Weight 302/Lbs.

Lathe

3520B Wood Lathe

The Powermatic® 3520B is the third evolution of the time honored lathe with many new and improved features. The 3520B retained all the features of the prior models such as the sliding headstock, electronic variable speed with low and high speed ranges, and the spindle lock. The enhanced features include a digital RPM readout, built in spindle indexing on the head stock, and a re-designed tailstock with internal storage, chrome trimmed handwheels, and a laser etched quill which is self ejecting. The toolrest assembly also has improved locking on a new profile tool rest which can accommodate an optional dust hood assembly that travels with the toolrest. Additional features include a set of dead centers which hold a spindle for visual comparison, a two position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool caddy and a metal shelf for tool storage.

Stock# 1791254 $3,499.99

Standard Equipment:

• 2HP TEFC motor
• 3" Face Plate
• 14" Tool Rest
• Spur and Live (Ball Bearing) Ceneters
• Knockout Rod
• Spindle Lock
• 24 Position Indexer
• Remote Power Switch

Dust Collector

PM1300 Dust Collector W/ 2 Micron Canister

The PM1300 Dust Collector has dual 4” dust ports (or one 6”). The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves air flow and rigidity. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

Stock# 1791077CK $699.99

• 2 micron Filter Canister
• 4 Casters
• Dual 4" dust ports
• Digital Timer
• Specifactions:
• Motor 1-3/4HP, 115/230V
• CFM 1300
• Shipping Weight 180/Lbs

Dust Collector

PM1300 Dust collector w/ Filter Bag

The PM1300 Dust Collector has dual 4” dust ports (or one 6”). The cloth filter bag is made of a 30 micron material which aids in the filtration of all but the finest dust particles, and the large capacity collection bag reduces the number of bag changes. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. Four swivel casters and conveniently located handles allow for easy mobility.

Stock# 1791077BK $499.99

Standard Equipment:

• 30 micron Filter Bag
• 4 Casters
• Dual 4" dust ports
• Digital Timer

Dust Collectors

PM1900 Dust Collector w/ Filter Bags

The PM1900 Dust Collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The 30-micron cloth filter bags aid in the filtration of all but the finest dust particles, and the large capacity collection bags reduce the number of bag changes. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. Multiple connection port capability make this machine a central dust collection system for the entire woodworking shop. Four swivel casters and conveniently located handles allow for easy mobility.

1791075BK $899.00

Standard Equipment:

• Casters
• 30 Micron Bags
• Remote Controlled Digital Timer

Dust Collector

PM1900 Dust Collector w/ Filter Canisters

The PM1900 Dust Collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. A 2-micron canister filter offers over six times the filtering area of standard filter bags. The large capacity, clear collector bags reduce the number of bag changes, and multiple connection port capability make this machine a central dust collection system for the entire woodworking shop. The all-metal duct improves rigidity and air flow. Four swivel casters and conveniently located handles allow for easy mobility

1791075CK $1,099.00

Standard Equipment:

• Casters
• 2 Micron Filter Canisters
• Remote Controlled Digital Timer

Mortiser

PM701 Bench Top Mortiser

Stock  Number 1791310 $399.00

The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35°. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides plenty of work-holding force and will swivel to accommodate angled workpieces. The heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.

Specifications: 

• Spindle Speed (RPM): 1725
• Swing (in): n.a.
• Chuck Size (in.): 1/2
• Chisel Capacity (in.): 1/4 - 1
• Chisel Shank Capacity (in.): 5/8 I.D., 3/4 I.D., 1-1/8 I.D.
• Head Stroke (in.): 6
• Chisel Center to Fence (in.): 4
• Drilling Capacity (in.): n.a.
• Under Hold-Down (in.): n.a.

Mortiser

719T Tilt table Mortiser With Stand

Stock number 1791264K  $999.99

The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35°. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides plenty of work-holding force and will swivel to accommodate angled workpieces. The heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.

Specifications:

• Spindle Speed (RPM): 1725
• Swing (in.): n.a.
• Chuck Size (in.): 1/2
• Chisel Capacity (in.): 1/4 - 1
• Chisel Shank Capacity (in.): 5/8 I.D., 3/4 I.D., 1 - 1/8 I.D.
• Head Stroke (in.): 6
• Chisel Center to Fence (in.): 4
• Drilling Capacity (in.): n.a.
• Under Hold-Down (in.): n.a.

Air Filter

PM1200 Air Filtration System
 
Stock number 1731330 $349.00 

Your shop may look clean, but how clean is the air? The PM1200 Air Filtration System traps up to 99% of all 5-micron particles and 85% of all 1-micron particles for a healthier work environment. Three blower speeds modify air flow. The unit can be operated either at the cabinet or with the remote transmitter which uses radio-frequency, eliminating the need for line-of-sight operation. The timer has nine settings, allowing continuous operation for up to 9 hours while you’re away, and will shut off at the end of that period. The filter guards can be removed and installed without tools, for instant filter access.

Specifications:

• Speeds (CFM): 547, 706, 1196
• Timer Settings (hours): 1 to 9 hours
• Outer Filter (microns): 99% of 5 micron particles
• Inner Filter (microns): 85% of 1 micron particles
• Motor HP: 1/4 HP
• Motor Phase: 1 PH
• Motor Voltage: 115V
• Motor Amps: 3.5
• Model Number: PM1200

Sander

31A Belt / Disc Sander

Stock number 179129K  $1,399.00

Loaded with features, the 31A from Powermatic can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the Integral Dual Dust Port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6" x 48" belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45° and 90° and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.

Specifications:

• Part Number: 1791291K
• Style: Combination Belt / Disc
• Base Size (L x W x H): 20 x 17 1/4 x 27 1/2 "
• Table Working Height: 34 " disc, 36 " belt
• Sanding Arm Locking Positions: 0 °, 45 ° and 90 °
• Belt Size (L x W): 48 x 6 "
• Belt Speed: 2410 sfpm
• Belt Table Size (L x W): 13 1/4 x 7 1/2 "
• Belt Table Tilt: 45 ° down
• Disc Diameter: 12 "

Sander

25" Dual Drum Sander

Stock Number 1791290   $3,599.00

Finally, a production class Dual Drum Sander that is loaded with features. This machine features a 5HP motor to power the twin poly V-belts. The dual steel drums have a hard durometer rubber coating to assure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides years of vibration free sanding, with plenty of storage space underneath.

Specifications:

• Maximum Board Width: 25
• Minimum Board Length: 9"
• Maximum Board Thickness: 5
• Minimum Board Thickness: 1/32"
• Drum Diameter: 6"
• Sanding Drums (number of drums): 2
• Drum Length: 25"
• Drum Speed: 1700 RPM
• Conveyor Motor: 1/4 HP

Power feeders

PF SERIES POWER FEEDERS

These rugged, heavy-duty stock feeders feature continuous-duty motors that transfer power from the gear box to the feed roller through the roller chain and sprockets, providing superior positive feeding for all types of materials. The fully adjustable support columns feature moveable universal joints and heavy locking mechanisms that lock the feeder in horizontal, vertical, or angle feed positions. Solid cast iron construction of bodies, bases and universal joints provide stability with vibration-free feeding. The smart roller system provides money-saving wheel changes by allowing the replacement of the tire only, not the complete assembly as on other units.

Specifications:

• St.# 1790800K PF-33,3 wheel,1hp,3ph,230V,4 Sp.     $899.99
• St.# 1790807K PF-31,3 wheel,1hp,1ph,230V,4 Sp.     $999.99
• St.# 1790811K PF-43,4 wheel,1hp,3ph,230V,4 Sp.     $999.99
• St.# 1790812K PF-41,4 wheel,1hp,1ph,115V,4 Sp.  $1,099.99

Specifications:

• Blade Diameter  10"
• Arbor Diameter 5/8"
• Maximum Depth of cut 3-1/8"
• Maximum Rip Right of blade 50"
• Max. Dado Width 13/16"
• Max. Dia. Dado 8"
• Cast Top Dim. 30.5"D x 42"W
• Overall Dim. (L x W x H/in) 85 x 37 x 34.5
• Shipping Weight 600/Lbs

Specifications:

• Blade Diameter  10"
• Arbor Diameter 5/8"
• Maximum Depth of cut 3-1/8"
• Maximum Rip Right of blade 50"
• Max. Dado Width 13/16"
• Max. Dia. Dado 8"
• Cast Top Dim. 30.5"D x 42"W
• Overall Dim. (L x W x H/in) 85 x 37 x 34.5
• Overall Dim. (W/30" Fence) 61 x 37 x 34.5
• Shipping Weight 600/Lbs

Specifications:

• Stock# 1791317K 115/230V, 1HP, Helicial Head $1,299.99
• Stock# 1791279DXK W/6" Quick Set Straight 3 Knife Cutter Head $899.00

Stock Number 1280100C 3HP, 230V, 1 Phase $2,999.99
Stock Number 1280101C 5HP, 230V, 1 Phase $3,199.99
Stock Number 1280102C 5HP,230V, 3 Phase  $3,199.99

Specifications:

• Cutting Capacity (H/in) 6"
• Cutting Capacity (W/in) 13.5"
• Min. blade (W/in) 1/8"
• Max. blade (W/in) 3/4"
• Blade (L/in) 93.5"
• Motor 1.5hp, 115/230V (prewired 115V)
• Shipping Weight 221/lbs

Stock Number 1791216K $899.00

Specifactions:

• Swing Over Bed 24"
• Swing Over Tool Rest Base 18.5"
• Working Distance Between Centers 42"
• Outboard Turning 48"
• Speeds RPM 0-910, 0-2000 and 0-3500
• Motor 3HP  1 Phase or 3 Phase with inverter, 230V
• Overall Dim  (L x W x H/in) 75 x 26-3/4" x 60
• Shipping Weight 904/Lbs

Specifactions:

• Motor 3hp 230V, 1 Phase
• CFM 1900

Specifactions:

• Motor 3hp 230V, 1 Phase
• CFM 1900
• Shipping Weight  250/Lbs

Specifications:

• Dual feed rates 16 and 20 FPM
• Maximum planing width 14-7/8"
• Maximum planing thickness 6"
• Full width depth of cut 1/8"
• Maximum depth of cut 1/4"
• Shipping weight 537/

Specifications:

• Feed rates 16, 20, 24, 31
• Maximum planing width 20"
• Maximum planing thickness 8"
• Full width depth of cut 3/32"
• Maximum depth of cut 1/4"
• Shipping weight 890/lbs

Specifactions:

• Spindle Speeds 7500 and 10,000
• Reversable YES
• Table Size 40" X 30"
• Spindle Travel 4"
• Shipping Weight 690/Lbs

Specifactions:

• Motor 1-3/4HP, 115/230V
• CFM 1300
• Shipping Weight 150/Lbs

 Free 6" Riser Block. Increases Height of cut to 12"
A 127.00 Value